Dimensional Letters in Longmont, CO: Stud Mount vs. Spacers

Longmont has a lot of buildings with character: century-old brick along Main Street, converted warehouses, and metal-sided flex buildings in the industrial areas off Airport Road and Ken Pratt Boulevard. Dimensional letters in Longmont, CO are one of the cleanest ways to put a name on those walls without hiding the architecture. The key decision for most exterior projects is how the letters attach: flush with stud mounting, or standing off the wall on spacers.

This guide covers which letters suit which Longmont building types, how stud mounting and spacers compare, and what to plan for on brick, block, and metal walls. We build these signs in our own shop on Delaware Place, so this is the work we see every week.

What Dimensional Letters Are (and How They Differ From Channel Letters)

Dimensional letters are solid or fabricated letters cut from materials like aluminum, acrylic, PVC, or high-density urethane. They have real depth, but unlike channel letters they are usually not hollow and do not have lighting inside. That makes them a strong fit for:

  • Buildings where the sign is mainly seen in daylight.
  • Historic facades where an illuminated cabinet or raceway would look out of place.
  • Industrial and flex buildings that need a durable name or address without electrical work.
  • Projects that will be lit by existing gooseneck or wall-wash fixtures rather than internal LEDs.

If you need the sign to glow at night on its own, channel letters or halo-lit fabricated letters are usually the better tool. Otherwise, dimensional letters give you a clean, permanent look at a lower complexity.

Dimensional Letters in Longmont, CO: Matching the Letter to the Building

Historic brick downtown

Downtown Longmont along Main Street is full of older brick storefronts. Many owners want a sign that looks like it belongs to the building. Painted aluminum or metal-laminated letters mounted on short spacers often hit that mark. Downtown properties may be subject to design guidelines and review, so materials, size, and fastening into masonry should be planned before fabrication.

Industrial and warehouse buildings

Concrete tilt-up, block, and metal panel buildings in Longmont’s industrial areas often have large, plain walls viewed from a parking lot or road. Thicker aluminum or PVC letters at a generous height read well from a distance. These walls usually allow simpler mounting with fewer review hurdles.

Newer mixed-use and office buildings

In areas like Prospect New Town and newer office parks along Hover Street, stucco, fiber cement, and stone veneer are common. Here, letter weight and the right anchor for each substrate matter as much as the look.

Stud Mount vs. Spacers: How Exterior Letters Attach

Almost every exterior dimensional letter is installed with threaded studs set into the back of the letter. The difference is whether the letter sits tight to the wall or floats off it.

Flush stud mount

The letter sits directly against the wall, with studs going into drilled holes filled with adhesive or anchors.

  • Look: clean and low-profile, like the name is part of the building.
  • Best on: smooth, flat surfaces such as metal panel, smooth stucco, or finished concrete.
  • Watch out for: uneven brick or textured block, where a flush letter can rock or leave gaps that trap water and dirt.

Stud mount with spacers (standoffs)

Spacers are short sleeves placed on each stud so the letter stands off the wall, typically a fraction of an inch to an inch or more.

  • Look: a subtle shadow line that adds depth and makes the letters pop, especially in low sun.
  • Best on: brick, rough block, and stone, where spacers bridge uneven surfaces.
  • Practical benefits: snowmelt and rain drain behind the letter instead of pooling, and it is easier to clean and repaint the wall later.

Drilling into brick: mortar joints vs. brick face

On older brick, we generally prefer to anchor into mortar joints where the layout allows. Mortar is easier to repair than a cracked or chipped brick face. A paper or digital pattern is made for each letter so every stud lands where it should before a single hole is drilled.

Materials for Exterior Letters in Longmont

  • Cut aluminum: durable and light. Paint or a metal finish holds up well to Colorado UV.
  • Fabricated aluminum: hollow, deep letters for large sizes without excessive weight.
  • Acrylic: crisp edges and good color options, better under an overhang than in full exposure.
  • PVC: economical and weather resistant, good for mid-size letters on lower walls.
  • High-density urethane (HDU): can be carved or textured, a good fit for traditional looks downtown.

Longmont’s climate matters here. Strong sun at altitude fades low-grade paints, and freeze-thaw cycles work on any joint that holds water. Quality coatings, sealed edges, and good drainage are worth the investment. See more on our dimensional letters page.

Cost Factors for Dimensional Letter Signs

  • Material and thickness: aluminum and HDU usually cost more than PVC or acrylic at the same size.
  • Letter height and count: more and bigger letters mean more material and labor.
  • Finish: custom color matches, metallic finishes, or two-tone edges add steps.
  • Mounting: spacers, masonry work, and pattern making add installation time.
  • Height and access: second-story or parapet installs may need a lift.
  • Removal and wall repair: taking down an old sign and patching holes.
  • Permits: city sign permit fees and any design review.

How We Handle Exterior Letter Projects

  1. Site visit: we check the wall material, flatness, mortar condition, and viewing distance.
  2. Design: a scaled rendering on a photo of your building, with material and mount callouts.
  3. Permitting: our in-house team prepares and submits the City of Longmont sign permit.
  4. Fabrication: letters are cut, finished, and fitted with studs in our Longmont shop.
  5. Installation: we use a mounting pattern to drill, set the studs, and level each letter.

Browse examples on our work page, or learn about larger exterior projects on our building signage page.

Checklist Before Ordering Exterior Letters

  • Confirm whether your building falls under any downtown design guidelines.
  • Check that the letter color contrasts with the wall in full sun and in shade.
  • Pick spacers for brick or rough surfaces.
  • Get landlord approval for drilling into the facade.
  • Decide if you need lighting, now or later, so the design can allow for it.
  • Make sure the letter height suits the distance customers will view it from.

Dimensional Letters in Longmont, CO: FAQ

Do dimensional letters need a permit in Longmont?

Most permanent exterior signs need a city sign permit. We handle the application as part of the project.

Will mounting damage my brick?

Anchoring into mortar joints when possible limits damage and makes future repair easier.

Can dimensional letters be lit?

Standard solid letters are not lit internally, but they can be lit by external fixtures. For built-in lighting, consider halo-lit fabricated letters or channel letters.

How long do exterior letters last?

That depends on material, finish, and exposure. Aluminum with a quality coating generally lasts longest in Colorado sun.

Talk to a Longmont Sign Shop

Whether your building is a brick storefront on Main Street or a warehouse near Airport Road, we can help you choose the right material and mount for dimensional letters in Longmont, CO. We are based right here in town and serve all of Northern Colorado; see our service area. Call (888) 303-3936 or contact us to set up a site visit. Office hours are Monday through Friday, 8:30 AM to 5:00 PM.

Accessibility Toolbar